Skip to content

Limbs

The biped's arms and legs each have an FK chain and a two-bone IK, blended by the limb control's ikfk channel (0 is FK, 1 is IK). The limb controls are L_Arm, R_Arm, L_Leg and R_Leg; their channels are on the picker's switch buttons and in the Avar Editor.

The other half follows the limb

The half a limb is not using stays on it. In FK, the IK hand or foot and the pole are drawn where the arm or leg actually is; in IK, the three FK controls are. The rig does this itself, with an IK/FK match constraint on each limb, and nothing else in the rig reads those drawn positions, so the limb evaluates exactly as before.

Switching IK and FK without a pop

Switch a limb with its button in the picker, with Switch to IK / FK in the marking menu, or from usdview's right-click menu. The controls taking over are already where the limb is, so the switch only writes their values, which the rig has already computed, including the stretch carried in stretchTop and stretchBottom. Nothing is solved when you click, and the values and the switch land as one edit and one undo. In animation mode they are keyed at the current frame.

Switching to FK resets pvPin and twist, which only IK has.

Channels

Channel Range Does
ikfk 0 to 1 Blend between FK (0) and IK (1).
pvPin 0 to 1 Pin the elbow or knee to the pole-vector control in IK.
stretch 0 to 1 Let the IK limb stretch past full reach to follow the hand or foot.
softStretch ≥ 0 How gently the IK limb eases into full reach instead of popping straight.
stretchTop ≥ 0 Lengthen the upper bone, in IK and FK. In FK the lower controls follow.
stretchBottom ≥ 0 Lengthen the lower bone, in IK and FK.
twist degrees Roll the IK bend plane about the limb.
autoClav (on L_Shldr, R_Shldr) 0 to 1 How far the shoulder follows the arm (Auto Clavicle); 0 turns it off.

Stretched bones scale the skin along the bone, so the mesh lengthens with the limb.

At rest, IK reaches slightly further

With the default soft stretch, an IK limb at rest is a fraction of a percent longer than FK. That is intended and matches the delivered rig: the soft ease starts just short of full reach.

The solver

The limb behaviour is the Two-Bone IK node's softDistance stretch policy, with the FK Chain's segmentScale. Both are documented with every parameter in the node reference.